Enabling and disabling taps

This article covers how to enable and disable self service taps via the EPOS. You can also enable and disable RFID readers. See Enabling and disabling RFID readers.

You may want to disable a tap to prevent it being used if there is an issue with the beer, or the beer line. Disabling a tap will prevent a customer from pouring from it, even if they have a valid tab linked.

Disabling a tap

To disable tap go to the Admin screen of the EPOS and press on the Disable button under Tap Override.

You’ll see a pop up with a list of tables. Select the table for the tap you want to disable. You can also select All.

Then, you’ll be given a list of taps on that table. Press on a tap to disable it.

You will see a message informing you that the tap has been switched off and will see a red cross next to the tap on the Table Manager view in the centre of the admin screen.

Enabling a tap

To enable a tap that has previously been disabled, press the Enable button under Tap Override. 

You’ll see a pop up with a list of tables. Select the table for the tap you want to enable. You can also select All.

Then you’ll be given a list of taps to enable. Press on a tap to enable it.

You will see a message informing you that the tap has been enabled and will see a green tick next to the tap on the Table Manager view in the centre of the admin screen.